Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
General Discussion / Re: Earthroamer
« Last post by YJScrounge on January 19, 2018, 12:37:34 PM »
Rich & Famous
22
General Discussion / Re: Earthroamer
« Last post by joe98tj on January 19, 2018, 12:32:43 PM »

 $1.5 Mil for the F750 based HD model...

They're currently building three with atleast two more on the way (several more is what they say) meaning within the next year and a half they're booked to make over 7.5 mil for vehicles that will probably get used once or twice a year...
23
General Discussion / Re: Rivet Nut Setter
« Last post by Mr. Easy on January 19, 2018, 12:31:51 PM »
I've seen it done without the tool, but if your doing more than 2 or 3, I would think it would be nice to have the tool.

yea, that's a PITA if you're doing alot of them.
24
General Discussion / Re: Rivet Nut Setter
« Last post by sedge1080 on January 19, 2018, 12:30:25 PM »
We have an expensive version of that at our shop.  It works well.  That is probably the quality of the HF one, and will probably They make small hand held versions.

One size only, but they work well and pretty solid.

https://www.mcmaster.com/#96349a509/=1b73h9q

25
General Discussion / Re: Rivet Nut Setter
« Last post by RedJeepster1 on January 19, 2018, 12:27:14 PM »
I've seen it done without the tool, but if your doing more than 2 or 3, I would think it would be nice to have the tool.
26
General Discussion / Re: Earthroamer
« Last post by MasterDrazhar on January 19, 2018, 12:12:42 PM »

 $1.5 Mil for the F750 based HD model...
27
General Discussion / Re: Rivet Nut Setter
« Last post by Mr. Easy on January 19, 2018, 11:40:35 AM »
The simple tool is a bolt a nut and a washer

1:10 of this video shows how.
28
General Discussion / Re: Rivet Nut Setter
« Last post by MassJK on January 19, 2018, 11:35:02 AM »
The simple tool is a bolt a nut and a washer
29
General Discussion / Re: Rivet Nut Setter
« Last post by Broken99TJ on January 19, 2018, 11:22:25 AM »
If you buy the steel vs aluminum nut inserts, the HF will not do the job. Also HF does not sell the nutserts?
30
General Discussion / Re: Radiator Recommendations
« Last post by YJScrounge on January 19, 2018, 11:12:29 AM »
Tis why I bought a brass radiator - repairable
Pages: 1 2 [3] 4 5 ... 10