Author Topic: CJ7, CJ5, YJ, Tons of Jeep stuff  (Read 1481 times)

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
CJ7, CJ5, YJ, Tons of Jeep stuff
« on: March 15, 2017, 08:34:16 PM »
NO ZJ or XJ parts except axles listed below, NO WINCH or TIRES!!!!

Good steering column NON TILT, with keys, $80

YJ steering box, good condition, WITH DROP PITTMAN ARM $80

Good YJ grill, complete, headlights etc.....$100

YJ radiator, good, holds, no leaks, $60

Several CJ radiators $60

Good YJ hood, a little dented, $50

NICE YJ roll bar, complete, no pads, $80

OLD school CJ7 70's doors that use a flat plate and not a striker to close, some rust, most everything there, windows work fine, latches need disassembly, cleaning, and oil, big mirrors(factory?) $150

A really cherry set of them, $300

Everything from under dash and firewall, sway bar, etc...Tell me what you need I might have it

transfer skid plate $50

Dana 30 front axle and AMC 20 rear from 1984 jeep, 120K miles, works great, brakes are good, 2.73 gears $250 or BO

TONS MORE!!!

Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Engine sold! Love to sell rolling shell, in whatever configuration we can make a deal on......
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Hood, t18,d20, windshield frame, dash, steering column, driveshafts, master cylinder, slave, hydraulic clutch, grill all sold.
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline Space Shuttle Commander

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 5305
How much for the 300 ?
Sometimes I get to drive Becca's Jeep

**** ALAN TASTE GOOD  ****

Offline King of the Hill

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 2486
  • The best beer in the world is the one in your hand
    • Jeeps on the Brain
Is the radiator gone?
75 CJ-5        Plow Jeep Still for Sale - $800 w/4way plow
77 CJ-5        Red Jeep - 401, T18, Locked F&R
77 CJ-7        Sons Jeep - Built from Race Jeep remnants
79 CJ-7        Q-Track - Aging gracefully in the woods(well, not much left)
84 CJ-7        Rock Jeep - BYS  (Big Yellow Shitbox) on one tons
95 Wrangler  Sons commuter Jeep - bone stock 4 popper
97 TJ           Black Jeep on Slinkys
04 Grand Cherokee Overland - Wife's Jeep,  Too nice for me!

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Oh yeah Frank took that, sorry buddy.

Got a Waggy Front 44 with 4.10s now with 5 on 5.5 bolt pattern, 60" WMS for sale now, pass drop. PM me
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
I'd love to make a deal on the rolling shell cheap!!!! That means axles, frame, body, and whatever else we can come to terms on.

Frame by itself, great condition, very clean all the way to the rear springs then it's got some small areas of rust, has awesome rear bumper and tow hitch welded right to frame, $300

Tub, floors are great, rockers on side not so much, but easily repaired, rear wheel wells are comp cut with 1" x 1" framing underneath, $300

New 15 gallon gas tank, $100

2" lift springs and shocks, $200
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
I'll sell the rolling shell(tub ,frame, killer rear bumper, front axle, 2" lift springs, new gas tank, roll bar, dash, steering column and box) for $800 or Best Offer.
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
next......
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: P1981 CJ7, AMC, D30 Dana 44, 9.25 rear, 4.10s, Tons CJ, YJ stuff
« Reply #10 on: April 14, 2017, 08:15:07 AM »
Frame is gone, price drops!!! See 1st post
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: P1981 CJ7, AMC, D30 Dana 44, 9.25 rear, 4.10s, Tons CJ, YJ stuff
« Reply #11 on: April 24, 2017, 05:30:44 AM »
TONS of new parts listed. Getting a few CJs and YJs
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: 81 CJ7, 87 and 95 YJ, Tons of CJ, YJ stuff
« Reply #12 on: April 27, 2017, 09:49:06 PM »

Tf999 rebuilt one year ago less than 3 k on it $500

Dana 300 out of same Jeep works perfectly $300

Family style rollbar with front bars $100, one with only 1 cross bar, $80

Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: 81 CJ7, 87 and 95 YJ, Tons of CJ, YJ stuff
« Reply #13 on: May 01, 2017, 09:44:22 PM »
Just cut up four CJ7 and YJs, ask me for what you need,

I have a decent YJ frame with the title good CJ Hood YJ Hood crappy YJ fenders cheap xcetera
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: 81 CJ7, 87 and 95 YJ, Tons of CJ, YJ stuff
« Reply #14 on: May 07, 2017, 10:15:46 AM »
Free axles 95 YJ 3.07s, also 78 CJ7 axles with 3.54s FREE, narrow track, 30 front, amc 20 rear
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: 81 CJ7, 87 and 95 YJ, Tons of CJ, YJ stuff
« Reply #15 on: May 10, 2017, 08:40:43 AM »
Updated list:

NO ZJ or XJ parts except axles listed below

NICE 87 YJ frame, all body mounts are good, super clean except for rear 8" which is rotted on Drivers, side, 6" of pass side, $300

87 YJ driveshafts out of an auto, $60 each

1978 CJ7 doors, 1 is rusty, both are fairly complete and glass work perfectly.

Tf999 rebuilt one year ago less than 3 k on it $400

YJ Sport style rollbar with front bars, no pads $80

Good steering column NON TILT, with keys, $80

Smittybuilt Chrome rear bumper double tubes with towing hitch, fits all jeeps up to 2006, $100

YJ axles 1995, 3.73 gears, complete $200

YJ steering box, with DROP PITMAN arm, good condition, $80

1983 TF999 trans rebuilt 30K ago, works perfectly $350 for the trans

Good YJ grill, complete, auto trans cooler, headlights etc.....$100

YJ radiator, good, holds, no leaks, $60

Good YJ hood, a little dented, $50

95 YJ wiring harness, complete, under dash and engine side, $100

CJ7 Everything from under dash and firewall, gas, brake, and clutch pedal assembly, $60

 sway bar, etc...Tell me what you need I might have it

CJ7 transfer skid plate $50

Dana 30 front axle and rear AMC 20 from 1984 jeep, 120K miles, works great, brakes are good, 1 new caliper, needs pads, 2.73 gears I think, $250 or BO


242, 7120, 0331, 258, gladiator, AMC, Kaiser, 401, 304, 360, 4.0, hemi, mud, off road, dana 44, dana 60

YJ, TJ, XJ, MJ, XJ, ZJ, JK, JKU, BFG, mud, off road, wrangler, jeep, Toyota, swamper, dick Cepek, mickey thompson
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #16 on: May 19, 2017, 09:35:24 AM »
258 /4.2 out of 83 cj7, 120k miles, runs great, all accessories still on it, $400

T4 4 speed manual transmission fro same jeep, $260

Dana 300 out of same jeep, works great, $300
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #17 on: May 31, 2017, 08:32:06 AM »
I do have a few good CJ radiators and a nice Dana 300 for those who were asking.
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline Swim trunks and flippy floppies bitches!

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 4444
  • I got my swin trunks and my flippy floppys
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #18 on: May 31, 2017, 07:03:21 PM »
What color is the yj grill?
The jeep-95 YJ, 4.0 Turbo, spring over, Dana 60's, 36" TSL, hydro assist, body armor, tube fenders, bumpers, lighting, recovery, OBA, full cage and a cool hand throttle
What moves the Jeep-96 Ford F-350 Powerstroke, 4in exhaust, intake and 6 position chip
The cruiser - 2001 BMW 540i M-sport 6 speed

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #19 on: May 31, 2017, 09:07:58 PM »
Maron
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #20 on: May 31, 2017, 09:18:57 PM »
Like dark, dark red
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline JeepinMaxx

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 12756
  • E-Mail - ffederico@brierlylombard.com
99TJ Tummy Tuck and SYE, Front D30 with alloy shafts, Detroit locker 4.56, Rear D44, ARB locker 4.56.  Detoursusa.com Rear bumper, Superwinch EP9000 Front Cage



"We don't need more gun control - we need ASSHOLE CONTROL"

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: Now some 4.0 aftermarket items, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #23 on: June 01, 2017, 05:16:05 AM »
Thanks Frank, it's really clean after I got the dirt off it, no rust.
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/

Offline crushtheogre

  • Rock Crawler
  • ****
  • Posts: 1419
Re: TUB and FRAME, 81 CJ7, YJ, Tons of CJ, YJ stuff
« Reply #24 on: June 02, 2017, 05:51:42 AM »
Got a 98 4.0 complete engine, 80k miles, has everything except throttle body, ran great! Has aftermarket header on it  $450

Also selling a 83 CJ7 frame(with 78 Title and firewall vin plate, and 4" lift springs and shocks, frame is very good except for last 10" needs plating on inside only, I have the safety cap repair sections for the frame, and stock 2.73 axles under it, $600 for all of this
Scrambler project, Ford 408M, T176, D300, 44s, 4.56s, complete frame off.....holy welding nightmare....

DreamMaker Bath and Kitchen in Newington
http://www.dreamkitchenct.com/