Author Topic: throwout bearing  (Read 935 times)

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #25 on: January 24, 2018, 07:19:42 PM »
almost forgot one of the most important questions...is this something i should tackle before the warm weather or could it make it the whole next riding year?.. its only a  ticking/no squeal and everything works fine...more noticeable if I'm next to a stone wall or something to give resonance....
Mark

Offline Right Wing Curmudgeon!!!

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 8304
  • NE Jeep South Carolina Chapter
Re: throwout bearing
« Reply #26 on: January 25, 2018, 08:26:51 AM »
Turn up the radio.  Mine has been doing that for years!
03 Rubicon, 4 inch Clayton Short Arm Lift, Rokmen TT and Gas Tank Skids, TW DS front and Rear, 1 inch Daystar BL, 35x12.5-15 Cooper STTs, Warn 9.5ti winch.

A good plan violently executed now is better than a perfect plan next week.(George Patton)


Life is tough! It's even tougher when you're stupid.
(John Wayne)

Offline Right Wing Curmudgeon!!!

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 8304
  • NE Jeep South Carolina Chapter
Re: throwout bearing
« Reply #27 on: January 25, 2018, 08:28:33 AM »
And will someone PLEASE remove the JK under my name! :eek:
03 Rubicon, 4 inch Clayton Short Arm Lift, Rokmen TT and Gas Tank Skids, TW DS front and Rear, 1 inch Daystar BL, 35x12.5-15 Cooper STTs, Warn 9.5ti winch.

A good plan violently executed now is better than a perfect plan next week.(George Patton)


Life is tough! It's even tougher when you're stupid.
(John Wayne)

Online MassJK

  • Global Moderator
  • Rock Crawler
  • *******
  • Posts: 18101
Re: throwout bearing
« Reply #28 on: January 25, 2018, 08:39:11 AM »
You can change your profile pic any time. 
Quote from: Mrs. Whoopie Pies
Then we have those guys that feel like constant cornmeal in ones pants . Alan for example.

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #29 on: January 25, 2018, 11:01:04 AM »
Hmm good to know
Mark

Offline A new level

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 2361
Re: throwout bearing
« Reply #30 on: January 25, 2018, 07:35:27 PM »
I had a truck we called Chewbacca the throw out bearing was toast but drove it anyways. Lasted years lol
'16 JKR, Rock Krawler 3.5" Long Arm Off-Road Pro, 35" Nitto Trail Graplers

 Build thread http://forum.northeastjeep.org/index.php?topic=38405.new#new

Online MassJK

  • Global Moderator
  • Rock Crawler
  • *******
  • Posts: 18101
Re: throwout bearing
« Reply #31 on: January 25, 2018, 08:14:13 PM »
I had a truck we called Chewbacca the throw out bearing was toast but drove it anyways. Lasted years lol
I had a truck we called Chewbacca the throw out bearing was toast but drove it anyways. Lasted years lol
that was your ex
Quote from: Mrs. Whoopie Pies
Then we have those guys that feel like constant cornmeal in ones pants . Alan for example.

Online MassJK

  • Global Moderator
  • Rock Crawler
  • *******
  • Posts: 18101
Re: throwout bearing
« Reply #32 on: January 25, 2018, 08:16:25 PM »
I had a truck we called Chewbacca the throw out bearing was toast but drove it anyways. Lasted years lol
that was your ex
[/quote]
Quote from: Mrs. Whoopie Pies
Then we have those guys that feel like constant cornmeal in ones pants . Alan for example.

Online MassJK

  • Global Moderator
  • Rock Crawler
  • *******
  • Posts: 18101
Re: throwout bearing
« Reply #33 on: January 25, 2018, 08:17:03 PM »
fawk it all
Quote from: Mrs. Whoopie Pies
Then we have those guys that feel like constant cornmeal in ones pants . Alan for example.

Offline A new level

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 2361
Re: throwout bearing
« Reply #34 on: January 25, 2018, 08:27:32 PM »
I had a truck we called Chewbacca the throw out bearing was toast but drove it anyways. Lasted years lol
that was your ex
[/quote]


Hahahahahahahaha
'16 JKR, Rock Krawler 3.5" Long Arm Off-Road Pro, 35" Nitto Trail Graplers

 Build thread http://forum.northeastjeep.org/index.php?topic=38405.new#new

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #35 on: January 25, 2018, 09:24:43 PM »
yea ,,i should run it...theres no screech so its spinning,,,it must just be rattling on the shaft...thats all i can think of...all good
Mark

Offline JeepinMaxx

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 13795
  • E-Mail - ffederico@brierlylombard.com
Re: throwout bearing
« Reply #36 on: January 25, 2018, 11:15:36 PM »
no screech so its spinning,,,it must just be rattling on the shaft...that's all i can think of...all good
  Keep in mind this is NEJeep and that quote may come back to haunt you and "rattling on the shaft" could end up being your screen name  :wink:
99TJ Tummy Tuck and SYE, Front D30 with alloy shafts, Detroit locker 4.56, Rear D44, ARB locker 4.56.  Detoursusa.com Rear bumper, Superwinch EP9000 Front Cage



"We don't need more gun control - we need ASSHOLE CONTROL"

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #37 on: January 26, 2018, 09:03:54 AM »
Lol... alright I’ll definktely change it
Mark

Offline YJScrounge

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 4494
Re: throwout bearing
« Reply #38 on: January 26, 2018, 09:31:55 AM »
Believe in yourself!
"This situation requires an immature act be carried out on someone's behalf - We're just the guys to do it!" - Animal House

93YJ: Waggy 44 HD's F&R, Rear Detroit Locker, Front Eaton Elec Selectable, 5:13 Motive, Anti-Wrap Bar, WARN Hubs, 6" Lift on 35" Mud Terrains, 4.0 HO w/K&N Air Tube, Live Wire Ignition, WARN 8,000 lb Winch, AtoZ Cage and Sliders, FX Tuner Seats w/Harnesses, OBA, SOA

01 RAM Cummins Tow Rig

01 WJ: Son's DD/Mall Crawler, 2" Budget Boost, Skyjacker Shocks, JK 17" Wheels back-up Tow Rig

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #39 on: January 26, 2018, 09:14:01 PM »
I'm on it
Mark

Offline The Navy Commander

  • NEJEEP Member
  • Rock Crawler
  • *****
  • Posts: 5124
  • Shaq City is the place to rock. Semper Fi diddy
Re: throwout bearing
« Reply #40 on: January 26, 2018, 09:19:44 PM »
(or grade 10.9 or 12.9 if they are communist anti american hardware  :rotflmao: )

Now thats funny............
Superwinch EPi 9.0 Detours Custom Bumpers/Dropkicks, 3.5" RE Superflex Lift, 1" Daystar Body Lift, 15" Cragar Street Lock D, 33" Dick Cepek Crushers,
Solid Axle Diff Covers, Jeep Medic Belly Up Transmission/Engine Skid Plate Combo, Other Kirby+Skid Row stuff

Blessed are those who, in the face of death, concern themselves only with the front sight post...

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #41 on: February 05, 2018, 08:20:16 AM »
anyone familiar with the center force setup...just talked with ORE and thats what they run,,,just wondering if there are any concerns over TOB (looks like it has a plastic race in kit)...
Mark

Offline MasterDrazhar

  • Honorary Members
  • Rock Crawler
  • ****
  • Posts: 14136
  • 'F' with me? I'll STAB YA!
Re: throwout bearing
« Reply #42 on: February 05, 2018, 09:51:12 AM »

 You are WAY overthinking the clutch...

 You don't need to spend that money on the centerforce...unless you drive like an asshole or just want to do burnouts all day.

 The LUK kit is what the factory puts in,  If you want Heavier Duty go with the LUK heavy duty kit.  My only suggestion is either LUK kit you get, just replace the kit's included TO Bearing with either the all metal National or Omix TO Bearing.
Profile for Team_Oscar



Quote from: Sweet Cheeks Bitty
Nasty and ill-tempered?  I'll show you nasty and ill-tempered you old pinworm...

Quote from: Theo Maassen
Optimists are badly informed Pessimists.[/quote

Offline Space Shuttle Commander

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 6402
Re: throwout bearing
« Reply #43 on: February 05, 2018, 09:57:21 AM »
^^^^^

So much this ! you could have had it in and out 10 times by now
Sometimes I get to drive Becca's Jeep

**** ALAN TASTE GOOD  ****

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #44 on: February 05, 2018, 11:12:41 AM »
i know really....i guess ill go with luk...My concern with them before was that there were write ups of no dowels for centering them (or something like that)...anyways ill check them out with ORE
Mark

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #45 on: February 05, 2018, 11:12:59 AM »
and prob a national TOB
Mark

Offline MasterDrazhar

  • Honorary Members
  • Rock Crawler
  • ****
  • Posts: 14136
  • 'F' with me? I'll STAB YA!
Re: throwout bearing
« Reply #46 on: February 05, 2018, 11:48:14 AM »

 The kit comes with everything you need including the centering dowel and new pilot bearing.

 Only other stuff you may want to get are:
 All metal TO Bearing (National or Omix)  - About $30-$40
 New Release Pivot ball (Crown Auto)  - About $10

 and MAYBE
 Throwout Fork (Crown Auto)(Shouldn't need this)  - About $15
 
 Whole thing with a HD LUK kit plus extras should be around $215 or so and prolly like $160 for the OEM kit plus extras.

 Go with a centerforce and yer looking at like $360 just for the clutch kit
Profile for Team_Oscar



Quote from: Sweet Cheeks Bitty
Nasty and ill-tempered?  I'll show you nasty and ill-tempered you old pinworm...

Quote from: Theo Maassen
Optimists are badly informed Pessimists.[/quote

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #47 on: February 05, 2018, 11:50:16 AM »
exactly . done deal
Mark

Offline Space Shuttle Commander

  • Board of Directors
  • Rock Crawler
  • *********
  • Posts: 6402
Re: throwout bearing
« Reply #48 on: February 05, 2018, 12:39:09 PM »
slide hammers make the pilot bearing easy peasy

just sayin
Sometimes I get to drive Becca's Jeep

**** ALAN TASTE GOOD  ****

Offline markus68

  • NEJEEP Member
  • Web Wheeler
  • *****
  • Posts: 560
Re: throwout bearing
« Reply #49 on: February 05, 2018, 01:11:19 PM »
good advice.....
also unfortunately luk  doesn't make the pro gold for the 2013 JK..so i guess ill go with the kit below(which is oem) 
Mark