Cold air intake

[jemmac]

Question:
I have installed a cold air intake on a 2004 wrangler. The intake was
manufactured by mopar for jeep.
I have recently noticed a high pitched sound (similar to sqeaky breaks)
at around 2000 rpm under a load (going up a hill). Is this to be expected
as a result of the larger volume of air being taken in ?

 

[xjmark]

Hey jemmac, welcome to NEJeep!

I'm not too familiar with the Mopar intake, but I'm sure it's similar to the
Rock-it air tube and filter I'm using. I also have the poweraid spacer, and the two combined make a loud "screeching turbo" sound at part throttle.

You'll get used to it soon enough. :wink:

 

[GTIRS]

Mine does the same. it is the angle of the throttle body opening up and the larger volume of air entering the intake. its normal sounds like a blower spooling up under load and after 2k rpm.

 

[DonnyG]

Friend of mine has an 04' Super Duty 6.0L Very similar setup. Has a chip too. Punch the throttle and it sounds like someone turned on a vacuum cleaner under the hood. Tis' the sound of POWER.

 

[Rubi04TJ]

Friend of mine has an 04' Super Duty 6.0L Very similar setup. Has a chip too. Punch the throttle and it sounds like someone turned on a vacuum cleaner under the hood. Tis' the sound of POWER.

Or maybe just the sound of a TURBO desiel :lol: