M
Mandy
Guest
I am putting the lift in my jeep this sunday so if anyone is interested and has a lot of tools give me a call. It will be at Donny's house. Here is my phone number 860-309-0494
Mandy
Mandy
G
ghiradelli777
Guest
maybe i will call....but not about the lift.... :twisted:
Are you just going to put the lift in and use the t-case drop for a day? Are you planning on leaving it at Donny's until the D-shaft comes in on Monday?
If you do the lift Sunday, you will have to drop the plate, then on Monday, pull the case do the SYE, and re-adjust the control arms for the correct angle with the double cardin and SYE.
I can help Monday after work, or just help with the SYE on Monday if you need it. Sunday no go for me.
Call me if you need to, you know the number all to well Mandy :wink: :wink: :rotflmao:
If you do the lift Sunday, you will have to drop the plate, then on Monday, pull the case do the SYE, and re-adjust the control arms for the correct angle with the double cardin and SYE.
I can help Monday after work, or just help with the SYE on Monday if you need it. Sunday no go for me.
Call me if you need to, you know the number all to well Mandy :wink: :wink: :rotflmao:
I
iamayeti
Guest
Sure CT Granite,
I have my entire Jeep in little pieces, and have to put it back together and as soon as Mandy pipes up. I am nothing but old news. Man the power of women. :mad02:
Doug
I have my entire Jeep in little pieces, and have to put it back together and as soon as Mandy pipes up. I am nothing but old news. Man the power of women. :mad02:
Doug
M
Mandy
Guest
Well, Sunday morning we were supposed to leave my house around 8 am to go to Donny's and on our way pick up my nice new tires from XJMark..................Well that didn't go quite as planned. So around 8 pm last night Donny had my front axle out and began the long process of installing the lift. I want to say THANK YOU to the guys who offered to help, I really appreciate it, and if you are still interested in helping give Donny a call, I am sure he could use the help!!
Rubie Nubie
New member
I'd lend a hand but by the time I got to Donny's
I'd have to turn around and head back.... :mrgreen:
I'd have to turn around and head back.... :mrgreen:
DonnyG
New member
Going kinda slow. Lots of siezed bushings. And a few angular issues. Front is just about done. Tomorrow is Donny's TV night. Wed will get a few solid hours in. Thursday a couple more. Should be able to wrap it all up Friday. Damn, these things go a lot quicker with a bunch of friends and beer. :grinyes: :grinyes: Kinda sucks driving an hour, working on trucks for 11 hours, then driving an hour home...just to work on trucks again!!! :zbanghead: :Tools: :Tools: :zbanghead:
But, she's worth it. :mrgreen:
But, she's worth it. :mrgreen:
M
Mandy
Guest
cjshloman said:
Thanks Bull :mad02: :mad02:
JeepinMaxx
Active member
Mandy/Donny - I have Friday off (originally to start on my SYE T-Case install in the late afternoon). If you are doing the lift in New London I may be able to stop by and help late morning/early afternoon. I know a little about the RE lift (I recently helped host RubiRick's RE install mini wrenchfest). If it's at Mandy's - I can't afford the gas for a round trip 
PM me with the address
Frank
PM me with the addressFrank
M
Mandy
Guest
Hey Frank, Donny will be working on my jeep most of the day friday so if you want to go down and lend him a hand that would be really great, give him a call, his number is posted up somewhere :wink:
DonnyG
New member
Lift is in!!! Very little vibes. Minor adjustments needed. Will be done later this week. Lots of the fittings wouldn't take too much grease. Wanna get them moving around a bit and regrease later this week. Only majorish problem was the siezed lower control arm bushings. Frozen right to the bolts. Had to invest in a much desired DeWalt angle grinder. Been looking for an excuse to grab one of these for a while now. Thanks to all those who offered help. Not that I didn't want it, it was just kinda easier working on it at my own pace. I didn't feel obligated to get more done than I wanted to at any given time. Very hectic week/weekend even outside of the install. Glad it's over. Now I can get to work on mine. Later.
